FOR IMMEDIATE RELEASE
WEDNESDAY, FEB. 28, 2007
||J. Kent Messick, Field Services Section Chief
NCDA&CS Agronomic Division
Now is the time to evaluate nitrogen needs of wheat
RALEIGH - Early March is the time for nitrogen fertilization of wheat. The N.C. Department of Agriculture and Consumer Services reminds growers to watch their crop closely and be ready to collect tissue samples at the appropriate stage of growth. A tissue test is the only reliable way to determine the correct amount of nitrogen to apply.
Tissue samples should be taken when wheat reaches Zadoks growth stage 30 (or the equivalent Feekes 4-5 stage). Check the growth stage by digging up a plant and slicing it down the middle. If the distance from the bottom of the plant to the top of the seed head is one-half inch, then it is time to submit a tissue sample to the NCDA&CS Agronomic Division laboratory.
To take a sample, use a pair of clippers or a sharp knife and collect the entire above-ground portion of the plant. Cut or clip the leaves about a half-inch above the ground to minimize soil particles clinging to the tissue. Also remove any dead tissue. A good sample consists of two handfuls of wheat plants collected randomly from 15 to 20 places throughout a field. The tissue sampling process is depicted online at www.ncagr.com/agronomi/pictorial.htm.
Put the sample in a paper bag or plant tissue envelope provided by NCDA&CS. Do not use plastic bags. Fill out the Plant Sample Information sheet, and be sure to write down the exact Zadoks, or Feekes, growth stage. Ship the sample(s) along with the completed Plant Sample Information sheet(s) and appropriate processing fee to the NCDA&CS laboratory.
The NCDA&CS Agronomic Division processes tissue samples within three days of their arrival at the lab. The quickest way to get test results is to visit the division's Web site, www.ncagr.com/agronomi/, and select "Find Your Report" on the left side of the page. Reports are also mailed to growers and their advisers.
For additional information or assistance, contact your NCDA&CS regional agronomist. To find the regional agronomist assigned to your area, visit www.ncagr.com/agronomi/rahome.htm, or call Kent Messick at (919) 733-2655.